Како одабрати прави колут за предење

Catching a predator from a reservoir is done using a spinning blank, but other components are also needed for a high-quality trophy output. The spinning reel is no less important than the rod itself, and its selection should be taken seriously.

Coil classification

Before you go to choose a spinning reel, you should figure out what type of device you need. For spinning fishing, not every model from the window is suitable, in order not to be left without a catch, you need to know the main varieties.

For spinning, two types are most often used

• bezinertsionki (the so-called meat grinders);
• multipliers (or just cartoons).

There is a third type of product, inertial coils, but due to the large number of shortcomings, they have already become a thing of the past. Such a coil can be found among grandfathers, and even then not at all. But deciding on the type is not enough, you also need to take into account other parameters that are important and there are quite a few of them.

Reel gear parameters

The selection of a reel for a spinning rod is carried out according to several parameters. Each of them is important and, under certain conditions, extremely necessary.

When choosing a coil, you should pay attention to:

• material and mass;
• forest capacity and size;
• method of laying fishing line;
• gear ratio;
• smooth running.

In addition to these, sometimes a clutch brake is also needed.

Further, it is worth considering each of the listed parameters in more detail in order to choose the best option.

Материјал и тежина

When choosing a component for spinning gear, namely a reel, attention is drawn to the material from which the spool is made and its weight. In order not to make the rod heavier, to carry out light movements when casting, especially for ultralights, attention should be paid to plastic products or lightweight metal alloys. It should be understood that plastic and metal with the same size have a completely different mass and this will affect the total weight of the tackle.

For sticks with large tests and for long casts, larger reels with metal spools should be preferred. They will withstand the fighting of large individuals, and the tackle itself will not be heavier.

If a budget version of the product is chosen, then any plastic one will do, but in this case we are not talking about durability.

Forest capacity and size

The diameter of the line or cord used will help you choose the right size of the reel, the thicker the base, the more you need a spool. In addition, an important indicator will be the lower and upper test, the maximum and minimum possible weight loads on the form.

It is conditionally possible to divide all spinning rods according to the following parameters:

• for ultralight choose a small spool, set a maximum of 1000;
• for forms with an average dough, a 2000 coil is suitable;
• for casting large baits, starting from 10 g and more, a reel with a larger spool is also used, 3000 is usually enough.

Trolling or sea fishing involves the use of reels with large spools, starting from 4000 and larger. But it is not worth putting very heavy ones, they will not give the expected effect.

The amount of fishing line or cord also depends on the size of the spool, usually these indicators are written by the manufacturer directly on the product.

Line laying and feeding method

For ordinary inertia-free, there are two types of laying the base of the tackle:

• models with an endless screw have a worm feed;
• crank feed will be for everyone else.

Even winding of the fishing line on the spool will be in both cases, but if something goes wrong, then this is the fault of the manufacturer. Humps and dips are formed only when the mechanism is not of high quality.

Spinning reels also differ in the way the line is wound, there are two types:

• rectilinear, when the turns are stacked on top of each other, which increases the capacity of the spool;
• cross, with it the capacity will be less, but it will prevent the formation of beards and arbitrary discharge of fishing line.

The same dimensions of the spool with cross winding will take less fishing line than straight ones.

Однос

This is one of the important indicators, he will tell you how many turns of fishing line the reel will lay with one scroll of the handle.

Inertialess and multipliers are conditionally divided into three subspecies:

• high-speed, they have an indicator of 1:6 or 1:7;
• universal, their performance is slightly more modest 1: 5-1: 2;
• power, they will be distinguished by 1: 4-1: 6.

Based on these indicators, the selection of the coil is done as follows: for ultralight, only high-speed ones;

For catching a larger predator, power, universal ones are suitable for blanks with an average dough.

Мирно трчање

This indicator directly depends on how many bearings the manufacturer has placed in the product. Their number affects:

• for ease of movement;
• elimination of backlash;
• век.

But you should not be guided by a large number of bearings, their location in the coil is more important. Ideal options would be those in which the bearings are located in the line layer and on the reel axle.

Фрикциона кочница

The friction brake becomes a problem for most spinners, and all because of the inability to set it up correctly. You need to be able to pick it up so that the fishing line flies off the spool a moment before the break. It is in such cases that many understand the importance of this part in the coil.

You can choose models without it, but such a product is installed on a spinning rod if you are sure that there are no large fish in the reservoir.

The choice of reel tackle according to the blank test

The reel is selected based on the rod test, that is, the blank whip parameter is taken into account, namely its maximum indicator.

The indicators are related as follows:

• for a blank up to 12 g, a spool with a size 1000 spool is suitable;
• up to 16 g put 1500 product;
• from 17g to 28g it is best to use 2000;
• 30-40 g will work fine with a 3000 coil;
• maximum test values ​​up to 80 g will require spools of 3500-4000.

Manufacturers and cost

When choosing a quality product, you should understand that it cannot be cheap. In some cases, there is a certain overpayment for the brand, but it is the name that gives confidence in the quality of the purchased product.

You should first study the market a bit, ask more experienced friends which coil company is better to give preference to. There are many various forums on the Internet where anglers share their impressions about products of this direction, including reels.

The products of such companies are popular:

• Daiwa;
• Shimano;
• РИОБИ;
• Микадо;
• Stinger.

Price indicators will directly depend on the quality of the components used, so very cheap products under such a brand should cause concern.

Спиннинг реел

This type is the most popular, they are easy to use, lightweight, durable, universal for any type of blank. The so-called meat grinders are used both for spinning and for other types of fishing. A beginner should learn to fish with a meat grinder, and when he decides on the most suitable type of wiring, you can try other models of coils.

The variety will allow you to choose the most suitable coil, and the spools can be changed, most models have plastic in stock.

Multiplier reels for spinning

This type is not suitable for every type of spinning, most often cartoons are put on trolling or used for jigging. It will not work to equip an ultralight with such a coil, they will be too heavy for a sensitive twig. Experienced anglers advise using a cartoon for catching zander at night, with this reel even small touches of a predator on the bait are felt even when casting far.

How to wind a fishing line on a spinning reel

It is important to wind the line on the reel correctly, if the operation has not been given enough attention, then fishing may be difficult when casting or rewinding the base.

In order for the process to go quickly and correctly, first of all, it is necessary to fix the reel itself on the butt of the rod, pass the free end through the ring and fix it on the spool.

1. At the same time, the shackle with the line layer must be folded back.
2. The shackle is lowered and the wound base is tucked into the line laying machine.
3. The next step is to keep the line or line taut, the warp must not sag, otherwise the spooling will not work properly.
4. Then, with simple movements, a sufficient amount of fishing line is wound on the spool, while constantly monitoring the tension.
5. The tip is fixed under a special clip.
6. You can knit a swivel and go fishing.

The choice of a reel for a spinning blank should be thoughtful, you should not take the first product that comes across. To collect good tackle, you need to study many nuances, and then be able to apply them when choosing.